Course : Design of Building/Bridge Structures

  • 5 September 2017, 09.56
  • Oleh:
  • 0
Course code/credits and contact hours : TKS4103/1.5 + 1.5 (Studio work)
Semester : VII
Instructor’s or course coordinator’s name : Dr.-Ing. Ir Djoko Sulistyo
Bibliography :
  1. SNI 1727:2013, Beban minimum untuk perancangan bangunan gedung dan struktur lain
  2. SNI Gempa 1726: 2012, Tatacara perencanaan ketahanan gempa untuk struktur bangunan gedung dan non gedung
  3. SNI 2847-2013, Persyaratan Beton Struktural Untuk Bangunan Gedung
  4. SNI 1729:2015, Spesifikasi untuk bangunan gedung baja structural
  5. SNI 7973-2013, Spesifikasi desain untuk konstruksi kayu
  6. Permen PU No. 11/PRT/M/2013 Tentang Pedoman Analisis Harga Satuan Pekerjaan
Instructor’s or course coordinator’s name
Brief description  : This course contains :

  1.  Introduction: Limit State Design Concept, Design Procedure, Standard/Code, Design Products
  2. Predesign: Understanding architectural drawings and soil investigation report; Design of structural plan system (Roof, Beam, Column, Foundation); Prediction of structural elements dimension (based on SNI, simple calculation/approach, chart application)
  3. Application of standards and codes for building structure design: types of loads, load combinations, Load Path, load effects, application of SNI 1727:2013; definition of seismic load, application of SNI 1726:2012; application of SNI Concrete (SNI 2847: 2013), Steel (SNI 1729:2015), Timber (SNI 7973:2013).
  4. Roof structure design: load analysis & load combination of roof; structural modeling, structural analysis, result interpretation; purlin design and its connections; roof sag rod & bracing design; roof truss beam design, connections and supports.
  5. Building frame-structure: load analysis, load combinations, seismic load analysis using static equivalent and response spectra; structural modeling and structural analysis using SAP, SAP2000 program result interpretation: definition of maximum internal forces for design of each beam, column, etc.
  6. Structural element design: plate, stair, beam, column, joint, foundation.
  7. Building structure drawing: drawing types, drawing standard, design drawing, detail drawing.
  8. Calculation of Bill of Quantity (BoQ) for building structure: calculation of structure quantity, unit price, BoQ.
  9. Technical specification for building structure work
Prerequisite Courses :
  1. Reinforced Concrete Structure II (Semester VI)
  2. Steel Structure II (Semester VI)
Required/ elective : Selected Elective
Studio work : Assignment in building/bridge structural design and cost
Laboratory work : N/A
Spesific goals of the course
Spesific outcomes : The students are expected to be able to design building/bridge in compliance with technical, security, and environmental aspects.
Student outcomes : (c) An ability to design a system, component, or process in order to be able to face the real constraints in economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability

(e) An ability to identify, formulate, and solve civil engineering problems by considering local resources

(k) An ability to use the techniques, skills, and modern engineering tools for civil engineering practice
Brief list of topics to be covered :
  1. Introduction: limit state design concept, design procedure, standard / code, design products
  2. Pre-design: architectural drawings and soil investigation results, structural plan system (roof, block, column, foundation)
  3. Estimation on structural elements dimensions (based on SNI, simple calculation/ approach, chart)
  4. Standards and regulations for building structure design: Roof structure design
  5. The design of building structure
  6. Design of structural elements; floor plates, ladders and beams-column & joint foundation
  7. Building structure drawing
  8. Budget plan of building structure
  9. Technical specifications for building structures